DataTale AIR Bedienerhandbuch PDF herunterladen (Seite 15)

3. Press the Power Switch to “turn on” the RAID Unit.

The RAID Unit can also be powered by using only the FireWire 800 cable,

without the AC/DC Adapter.

Press the Power Switch for at least 3 seconds when shutting down the RAID

Unit.

4. When connected, the Power LED light will become steadily white, and the Disk LED

lights will become blue and flash until the HDDs are detected.

Power

Disk1

Disk2

There’s no need for any concerns if the Disk LEDs blink or flash in red for a very

short period of time during power on. When the HDDs are detected, the Disk LEDs will

become and remain in blue.

5. You are now ready to begin using your RAID Unit!

Due to compatibility issues, if you use the eSATA interface to do the data transfer,

the Silicon Image eSATA host controller is highly recommended.

When using FireWire 800, you can “Daisy Chain” and connect other computer

hardware or digital devices to your RAID Unit (such as digital video camera, another

HDD, DVD writer, and much more). Please see “Daisy Chain” under “Q&As” Section

for more information.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Keine Kommentare

DataTale AIR Bedienerhandbuch Seite 15